LABOKLAV 55-MSV400 mm chamber diameter

LABOKLAV 55L-195L

The LABOKLAV series offers compact and space-saving steam sterilisers in volumes of 55-195 L in a wide range of equipment variants. Each chamber size (between 55 L and 195 L) can be set up as a floor-standing or table-top unit. The LABOKLAV is available in two chamber diameter options: 

• 400 mm: models 55, 80, 100
• 500 mm: models 135, 160, 195

Thanks to its innovative technology, the LABOKLAV does not discard the demineralised water, used for the recooling phase. Thanks to a closed recooling system with cooling water recirculation, the typical deionised water consumption is reduced by up to 80%. As a result, the LABOKLAV series saves you water and significantly reduces your operating costs.

About the LABOKLAV series:

• For the sterilisation of liquids, solids, and easily vented waste
• Water savings in the recooling phase significantly reduce operating costs
• All models are available as table-top or floor-standing units
• The Chamber lid can be variably positioned to the right, left, or rear
• Made in Germany - produced under high and permanently controlled quality standards
• Production according to DIN 58950 and DIN 58951
• Units are certified and bear the CE mark.
• Available in blue, green or, red
• Connection to existing disposal line is possible

Use the LABOKLAV series for:

• Media production in microbiological laboratories
• Quality control in the pharmaceutical and food industries
• Destruction sterilisation in medical diagnostics
• Sterilisation processes in research institutes and universities

Individual expansion stages:

Option M: Fast recooling

• Double-jacket cooling enables a reduction of the cooling phase by up to 50%.
• Suitable for open and slightly closed vessels
• No loss of water due to a closed recooling system leads to significant savings in operating costs.

Option MS: Fast recooling and counter pressure

• As version M, but with additional support pressure
• The back-pressure device enables liquid autoclaving without evaporation loss (for example, media or agar)

Option MSL: Fast recooling, counter pressure, and fan

• As version MS, but with an additional fan
• The radial fan ensures forced convection within the chamber, which prevents bursting of sealed containers.
• Additionally, the cooling performance is significantly improved. 

Option MSLV: Fast recooling, counter pressure, fan, and pre-vacuum

• As version MSL, but with additional vacuum
• A vacuum is necessary for the sterilisation of hollow bodies and mixed waste (i.e., waste containing all kinds of material, e.g., tips, cell culture dishes with residual medium, agar plates). Only if the air content is below 2% (saturated steam condition) can one be sure that the sterilisation process in the core was successful.
• The drying vacuum eliminates the need for post-drying in the drying oven when sterilising pipette tips, glassware, filters, and textiles.